Aastra Telecom 9480i Series - Manual (Page 895)

Operational, Basic, and Advanced Parameters
41-001160-03, Rev 00, Release 2.4 A-121
Parameter –
sip lineN autodial timeout
AutoDial Timeout
(in Web UI)
Aastra Web UI Advanced Settings->LineN->Autodial Settings
Configuration Files aastra.cfg, <mac>.cfg
Description On a per-line basis, this parameter specifies the time, in seconds, that
the phone waits to dial a preconfigured number after the handset is
lifted from the IP phone cradle.
If this parameter is set to 0 (hotline), the phone immediately dials a
preconfigured number when you lift the handset. If this parameter is set
to a value greater than 0, the phone waits the specified number of
seconds before dialing the preconfigured number (warmline) when you
lift the handset.
Default is 0 (hotline).
Format Integer
Default Value 0
Range 0 to 120
Examples sip line1 autodial timeout: 30
Draft 1