Configuring network settings manually, Tion, Draft 1 – Aastra Telecom 9480i Series User Manual
Page 206
Network Settings
4-24
41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Configuring Network Settings Manually
If you disable DHCP on your phone, you need to configure the following network
settings manually:
•
IP Address
•
Subnet Mask
•
Gateway
•
Primary DNS
•
Secondary DNS
You can configure the network settings using the configuration files, the IP phone
UI, or the Aastra Web UI.
Note:
If you disable DHCP on the phone, the phone uses the TFTP
protocol as the default server protocol. If you want to specify a different
protocol to use, see
“Configuration Server Protocol”
on
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
on
IP Phone UI
Step
Action
1
Press
on the phone to enter the Options List.
2
Select Administrator Menu.
3
Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4
Select Network Settings.
5
Select IP Address and enter the IP address of the phone.
6
Select Subnet Mask and enter the subnet mask.
Draft 1