Aastra Telecom 9480i Series - Manual (Page 396)

Operational Features
5-98 41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
The following table identifies the configuration parameters for LLDP and ELIN
and which method you can use to configure each parameter. This table also
indicates whether the parameters can be configured by an Administrator, a User,
or both.
Configuring LLDP-MED and ELIN
Use the following procedures to configure LLDP-MED and ELIN on the IP
phones.
Use the following procedure to enable/disable LLDP-MED using the IP Phone
UI.
Parameter Method of Configuration Who Can Configure
lldp Configuration Files Administrator
lldp interval Configuration Files Administrator
use lldp elin Configuration Files Administrator
LLDP Support IP Phone UI Administrator
LLDP Aastra Web UI Administrator
LLDP Packet Interval Aastra Web UI Administrator
LLDP ELIN Aastra Web UI Administrator and User
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “LLDP-MED and
ELIN Settings” on page A-129.
Note: You cannot configure the “LLDP Interval” or the “Use LLDP
ELIN” parameters via the IP Phone UI.
Draft 1