Aastra Telecom 9480i Series - Manual (Page 654)

Operational Features
5-356 41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
XML Override for a Locked Phone
The IP phones have a feature that allows a locked phone to be overridden when an
XML application is sent to the phone. This feature also allows you to still use any
softkeys/programmable key/Extension Module Keys applicable to the XML
application even though the phone is locked. However, any keys NOT associated
with the XML application cannot be used when the phone is locked.
Also, XML Get Requests override the locked feature on the phone so that any
softkey pressed by the user that initiates a Get Request continues to get sent.
To allow the overriding of the locked phone for XML applications, the System
Administrator must enter the following parameter in the configuration files:
• xml lock override
Configuring XML Override for a Locked Phone using the
Configuration Files
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section, “XML Override
for a Locked Phone Setting” on page A-240.
Note: A System Administrator can also lock and unlock a remote phone
using the “lock” and “unlock” commands with the
AastraIPPhoneExecute object in an XML application. For more
information about this feature, see Appendix F, the section,
“Using the
Lock and Unlock Commands” on page F-46 .
Draft 1