Audio transmit and receive gain adjustments, Audio transmit and receive gain adjustments -357, Draft 1 – Aastra Telecom 9480i Series User Manual

Page 655

Advertising
background image

Operational Features

41-001160-03, Rev 00, Releaes 2.4

5-357

Configuring Operational Features

Audio Transmit and Receive Gain Adjustments

The audio gain properties for the IP phone handset, headset, and speakerphone is
adjusted to reduce side-tone and echo on the local and far-end equipment. You can
adjust these settings from -10 db to +10 db to best suit your comfort level and
deployment environment by using the following parameters in the configuration
files:

headset tx gain

headset sidetone gain

handset tx gain

handset sidetone gain

handsfree tx gain

audio mode

The default setting for these parameters is 0 (zero).

The following table describes each parameter.

Note:

Aastra Telecom recommends you leave the default of 0 (zero) as

the settings for these parameters.

Parameter

Description

Headset tx gain

The increased (+db) or decreased (-db) amount of signal transmitted from
the headset microphone to t he far-end party.

Headset sidetone gain

The increased (+db) or decreased (-db) amount of sidetone signal from the
headset microphone to the headset speaker.

Handset tx gain

The increased (+db) or decreased (-db) amount of signal transmitted from
the handset microphone to the far-end party.

Handset sidetone gain

The increased (+db) or decreased (-db) amount of sidetone signal from the
handset microphone to the handset speaker.

(continued)

Draft 1

Advertising
This manual is related to the following products: