Draft 1 – Aastra Telecom 9480i Series User Manual
Page 659
Operational Features
41-001160-03, Rev 00, Releaes 2.4
5-361
Configuring Operational Features
Configuring Centralized Conferencing Using the Aastra Web UI
Use the following procedure to configure centralized conferencing using the
Aastra Web UI.
Aastra Web UI
Global Configuration
1
Click on Advanced Settings->Global SIP Settings->Basic SIP Network Settings.
2
In the “Conference Server URI” field, do one of the following actions:
•
To disable centralized conferencing on the IP phone, leave this field empty (blank).
•
To enable SIP centralized conferencing on the IP phone, do one of the following actions:
—
If you have specified a proxy server/registrar server, then to reach the media server via the
proxy server, set this field to one of the following:
conf (Sylantro server), or
Conference (Broadsoft server)
By setting this field to conf or Conference, you specify conf@<proxy_server _address>:
<proxy_port>. For example, if the proxy server address is 206.229.26.60 and the port used
is 10060, then by setting this parameter to conf, you are specifying the following:
[email protected]:10060.
—
To reach the media server using a different address/port than that specified by the proxy,
set this field to the following:
conf@<media_server _address>: <media_port>
Draft 1