Aastra Telecom 9480i Series - Manual (Page 692)

Advanced Operational Features
6-22 41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Blacklist Duration
The Blacklist Duration feature helps to reduce unnecessary delays during proxy/
registrar server failures, caused by the IP phone repeatedly sending SIP messages
to a failed server. If you enable this feature, then whenever the IP phone sends a
SIP message to a server, and does not get a response, the phone automatically
adds the server to the blacklist. The IP phone avoids sending messages to any
servers on the blacklist. If all servers are on the blacklist, then the IP phone
attempts to send the message to the first server on the list.
You can specify how long failed servers remain on the blacklist in the IP phone’s
configuration file or in the Aastra Web UI. The default setting is 300 seconds. If
you set the duration to 0 seconds, then you disable the blacklist feature.
Configuring Blacklist Duration Using the Configuration Files
Use the following parameter to configure the Blacklist Duration in the
configuration files:
• sip blacklist duration
Configuration Files
For the specific parameters you can set in the configuration files for setting Blacklist Duration, see Appendix
A, the section,
“Blacklist Duration Setting” on page A-236.
Draft 1