Lyntec RPCM - Manual (Page 13)

139-0498-01.13 13
Chapter Five--Control Setup
Chapter 5--Control Setup (Web Page)
OVERVIEW
STATUS
CONTROL
SETUP
SUPPORT
There are 5 main tabs on your RPC web page. This page will give
you a quick overview of the pages and their functions.
The status page allows you to view the current status of the
breakers and zones. Zones and individual breakers cannot be
manipulated from this page.
This page allows the user to manipulate individual breakers
as well as breaker zones. “All ON/OFF” and “Hurry-Off ”
commands can also be triggered from this page.
The setup section allows you to setup and use the RPC controller.
From this section you can manipulate the network settings,
assign breakers to zones, create sequences, activate emergency
management features, create schedules and assign contact
closures.
This page provides contact information for LynTec.
EVENT LOG This page provides a log of events.