Lyntec RPCM - Manual (Page 30)

139-0498-01.30
Appendix B--Troubleshooting/FAQ
30
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• This equipment must be installed and serviced only by
qualifi ed electrical personnel.
• Apply appropriate personal protective equipment (PPE) and
follow safe electrical work practices. See NFPA 70E.
• Carefully inspect the work area for tools and objects that
may have been left inside the equipment.
• Use caution while removing or installing panels so that they
do not extend into the energized bus; avoid handling the
panels, which could cause personal injury.
Failure to follow this instruction will result in death or
serious injury.
Appendix B--Troubleshooting
TROUBLESHOOTING THE
CONTROLLER Use the following table if you need to troubleshoot the RPC
controller.
DANGER !