Lyntec RPCM - Manual (Page 20)

139-0498-01.20
Chapter Five--Control Setup
20
2. Name the Zone. (Figure 5-7)
3. Choose Grouped, Sequenced, DMX or sACN operation. Note:
DMX and sACN may not be used within the same RPCM
(Figure 5-7)
Figure 5-7
Name the Zone
Choose operation
type from the
dropdown
4. If using DMX or sACN operation, select the address set
(Figure 5-8) or universe (Figure 5-9) from the dropdown.
Figure 5-8
Choose address set
from the dropdown
Figure 5-9
Choose universe
from the
dropdown