Chapter 1--introduction – Lyntec RPCM User Manual
Page 5
139-0498-01.5
5
Chapter One--Overview
This bulletin explains how to connect and operate the LynTec
Remote Power Controller-Mobile Power Distribution Cabinet
(RPCM). The controller uses remotely operated circuit breakers
to control up to 42 remotely operated branch circuits. Control
signals originate externally from commands received via
the communications network or from dry contact inputs.
Acceptable communications protocols include TCP/IP, sACN
(E1.31) and DMX-512.
OVERVIEW
Chapter 1--Introduction
CONTENTS
Each RPC comes standard with the following components
installed:
• RPC
Controller
• Power
Supply
•
400A Feed-thru Cam-Lok connectors for incoming power
connections
•
200% Neutral Connections
•
Main Circuit Breaker
•
Nine, four digit, LED front panel displays
•
Front panel LCD status display
•
Neutral to ground voltage transducer
Optional equipment that may be installed:
• Capacitive
buff er for brownout protection/operation.
Introduction