Lyntec RPCM - Manual (Page 23)

139-0498-01.23 23
Chapter Five--Control Setup
Numbering and addressing The RPC system allows the user to choose top/bottom panel
numbering or left/right panel numbering. (Figure 5-15) It also
allows you to select the direction for addressing (DMX only).
Figure 5-15
GLOBAL PREFERENCES
SETUP This section guides you through the setup process for the
many features and preferences in your RPC system.
Labeling In addition to labeling breakers, each panel in your RPC system
can be named (up to 16 characters) and the changes dated
(Figure 5-14). For multi-panel systems, scroll down to see
additional panels.
Figure 5-14
Figure 5-13