Lyntec RPCM User Manual
Page 26
139-0498-01.26
Chapter Five--Control Setup
26
Schedule Setup
Follow these steps to set a schedule (not applicable for DMX or
sACN).
1. Enable Schedules in Setup Home tab
2. Rename each schedule as desired
3. Assign weekday (M-F) on and off times by clicking on time
and off time buttons, using pull-down menu and clicking the
pick button to select.
4. Assign weekend (S-S) on and off times by clicking on time
and off time buttons, using pull-down menu and clicking the
pick button to select.
5. Enable each schedule by clicking the checkbox for that line.
6. Click the Save Changes button at the top of the page to save
Figure 5-19
Assigning Schedules to Zones
To assign a schedule to a zone in the “Panel” screen:
1. Select the desired zone from the drop down box.
2. Save
changes.
Figure 5-20