Lyntec RPCM - Manual (Page 7)

139-0498-01.7 7
Chapter Two--Safety Precautions
Chapter Two--Safety Precautions
This chapter contains important safety precautions that must
be followed before attempting to install, service, or maintain
electrical equipment. Carefully read and follow the safety
precautions below.
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• This equipment must be serviced only by qualifi ed electrical
personnel.
• Apply appropriate personal protective equipment (PPE) and
follow safe electrical work practices. See NFPA 70E.
• Turn off all power supplying this equipment before working
on or inside equipment.
• Always use a properly rated voltage sensing device to
confi rm that power is off .
• Replace all devices, doors, and covers before turning on
power to this equipment.
• Before energizing panelboard, all unused spaces must be
fi lled with blank fi llers.
Failure to follow this instruction will result in death or
serious injury.
DANGER !