Lyntec RPCM - Manual (Page 29)

139-0498-01.29 29
Appendix A
Events include:
Event 1 = “All Breakers ON”
Event 2 = “All Breakers OFF”
Event 3 = “Hurry OFF” zips all breakers off fast.
Event 4 = “EO” Emergency override (status only)
Event 5 = “Audio Timer” (NA) (status only)
Event 6 = “BO” Brown-Out (status only
Event 7 = “DMX/sACN”
Event 8 = “EL” Emergency Lighting
Verifi cation Scheme:
The following GET command will return the current status of all
breakers, zones and events in the RPC system.
GET /p2.rpc
The system will return the following:
breakers=10110111111111111111
zones=111111111011
events=1000000
The above return is displaying the status of a 20 circuit breakers
system in which all are presently ON, with the exceptions of
breaker #2 and breaker #5, which are OFF.
The above return is also showing the status of 12 zones, all are
ON with the exception of zone #10, which is OFF.
The events return is showing that event #1 is active = “All
Breakers ON”
Status returns for
Breakers: Status returns for Zones
and Events:
0 = OFF 0 = OFF
1 = ON 1 = ON
2 = Breaker Tripped 2 = Processing
3 = Failure
4 = Manual On
5 = Empty
Events Control = E