Lyntec RPCM - Manual (Page 2)

Read these instructions carefully and look at the equipment to become familiar
with the device before trying to install, operate, service, or maintain it. The
following special messages may appear throughout this bulletin or on the
equipment to warn of potential hazards or to call attention to information that
clarifies or simplifies a procedure.
The addition of either symbol to a “Danger” or “Warning” safety label indicates
that an electrical hazard exists which will result in personal injury if the
instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible
injury or death.
NOTE: Provides additional information to clarify or simplify a procedure.
Electrical equipment should be installed, operated, serviced, and maintained
only by qualified electrical personnel. This document is not intended as an
instruction manual for untrained persons. No responsibility is assumed by
Square D for any consequences arising out of the use of this manual.
This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to part 15 of the FCC Rules These limits are
DANGER
DANGER indicates an immediately hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, can result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not
avoided, can result in minor or moderate injury.
CAUTION
CAUTION, used without the safety alert symbol, indicates a potentially
hazardous situation which, if not avoided, can result in property damage.
HAZARD CATEGORIES AND
SPECIAL SYMBOLS
PLEASE NOTE
Class A FCC Statement
Electrical equipment should be installed, operated, serviced and
maintained only by qualified electrical personnel. This document is not
intended as an instruction manual for untrained persons. No responsibility
is assumed by LynTec for any consequences arising out of the use of this
manual.