Lyntec RPCM - Manual (Page 17)

139-0498-01.17 17
Chapter Five--Control Setup
DMX For DMX operation use the following steps:
The RPCM allows up to four diff erent sets of DMX starting
addresses within a single universe.
In the fi rst set, enter the fi rst individual breaker address. All
motorized breakers need to be assigned addresses manually.
If you would like the RPC to automatically assign breakers to
consecutive addresses. you may change that in the “Panels”
tab.
Please note that selecting sACN/DMX control for a breaker or
zone, will disable web control for that breaker/zone
Streaming ACN E1.31 For sACN operation use the following steps:
The RPCM allows up to four diff erent universes with sACN
operation.
First, assign a number to the universe.
In the fi rst set, enter the fi rst individual breaker address. All
motorized breakers need to be assigned addresses manually.
If you would like the RPC to automatically assign breakers to
consecutive addresses. you may change that in the “Panels”
tab.