Philips Avance Collection Amasadora - Manual (Page 9)

15
English
EN
Quick cleaning
Follow the steps below to clean the food
processor bowl and blender jar easier. (Make
sure that the blade is assembled in the bowl if
you clean the food processor bowl.)
1
Pour lukewarm water (not more than
0.5 liters) and a few drops of washing-up
liquid into the food processor bowl or
blender jar.
2
Place the lid on the food processor bowl
or blender jar, and then turn it clockwise
to fix it.
3
Turn the knob to speed P. Let the
appliance run for 30 seconds or until the
food processor bowl or blender jar is
clean.
4
After use, turn the knob to 0 position and
then unplug the appliance.
5
Detach the blender jar or food processor
bowl and rinse it with clean water.
6 Guarantee and
service
If you have a problem, need service, or need
information, see www.philips.com/support
or contact the Philips Consumer Care Center
in your country. The phone number is in the
worldwide guarantee leaflet. If there is no
Consumer Care Center in your country, go to
your local Philips dealer.
Mill (HR7978 only)
Before you start, make sure that you assemble
according to Fig. 8.
You can use the mill to chop coffee beans,
peppercorns, nuts, herbs, dried fruits etc.
Dried fruits such as figs can be chopped and
use as toppings for yoghurt or spread for your
bread or biscuit.
For best results when processing dried black
Mission figs, use max of 85g at speed P for
3 seconds.
Note
• Follow the recommended quantities, processing time
and speed for the ingredients as indicated in Fig 9.
• Do not exceed the maximum level of the mill jar.
5 Cleaning
Warning
• Before you clean the appliance, unplug it.
• Refer to the table (Fig. 10) for information on cleaning
the parts with water, dishwashing machine and/or moist
cloth.
Caution
• Make sure that the cutting edges of the blades and discs
do not come into contact with hard objects. This may
cause the blade to get blunt.
• The cutting edges are sharp. Be careful when you clean
the disc inserts, and blade units of the food processor,
blender, and mill.
1
Clean the motor unit with a moist cloth.
2
Clean the other parts in hot water
(< 60ºC) with some washing-up liquid or
in a dishwasher.
3
Store the appliance and accessories in a
dry place after cleaning.