Bryant 580D User Manual
Page 17
BASE UNIT DIMENSIONS — 580D036-072
UNIT
580D
CORNER WEIGHT*
A
B
C
D
lb
kg
lb
kg
lb
kg
lb
kg
036
140
63.5
105
47.6
159
72.1
56
25.4
048
142
64.4
106
48.1
162
73.5
60
27.2
060
150
68.0
115
52.2
160
72.6
65
29.5
072
165
74.8
136
61.7
200
90.7
64
29.0
*
Weights are for unit only (aluminum plate fins) and do not include options or crating.
CONNECTION SIZES
A
1
1
⁄
16
Љ
Dia. [27] Field Power
Supply Hole
B
3
⁄
4
Љ
— 14 NPT Condensate
Drain
C
1
⁄
2
Љ
—14 NPT Gas Connection
BOTTOM POWER CHART, THESE
HOLES REQUIRED FOR USE WITH
ACCESSORY PACKAGES —
CRBTMPWR001A00 (
1
⁄
2
Љ
,
3
⁄
4
Љ
)
CRBTMPWR002A00 (
1
⁄
2
Љ
, 1
1
⁄
4
Љ
)
THREADED
CONDUIT
SIZE
WIRE SIZE
REQUIRED
HOLE SIZES
(MAX)
1
⁄
2
؆
24 V
7
⁄
8
Љ
[22.2]
3
⁄
4
؆
Power†
1
1
⁄
8
Љ
[28.4]
1
1
⁄
4
؆
Power†
1
3
⁄
4
Љ
[44.4]
†Select either
3
⁄
4
Љ
or 1
1
⁄
4
Љ
for power, depending
on wire size.
NOTES:
1. Dimensions in [
] are in millimeters.
2.
Center of gravity.
3.
Direction of airflow.
4. On vertical discharge units, ductwork to be attached to accessory roof curb only.
For horizontal discharge units, field-supplied flanges should be attached to horizon-
tal discharge openings, and all ductwork should be attached to the flanges.
5. Minimum clearance (local codes or jurisdiction may prevail):
a. Between unit, flue side and combustible surfaces, 36 inches.
b. Bottom of unit to combustible surfaces (when not using curb), 1 inch. Bottom of
base rail to combustible surfaces (when not using curb) 0 inches.
c. Condenser coil, for proper airflow, 36 in. one side, 12 in. the other. The side get-
ting the greater clearance is optional.
d. Overhead, 60 in. to assure proper condenser fan operation.
e. Between units, control box side, 42 in. per NEC (National Electrical Code).
f. Between unit and ungrounded surfaces, control box side, 36 in. per NEC.
g. Between unit and block or concrete walls and other grounded surfaces, control
box side, 42 in. per NEC.
h. Horizontal supply and return end, 0 inches.
6. With the exception of the clearance for the condenser coil and combustion side as
stated in Notes 5a, b, and c, a removable fence or barricade requires no clearance.
7. Units may be installed on combustible floors made from wood or Class A, B, or C
roof covering material if set on baserail.
8. The vertical center of gravity is 1
Ј
-6
Љ
[457] up from the bottom of the base rail. Hori-
zontal center of gravity is shown.
17