Class1 FoamLogix 2.1A & 1.7AHP REV D - Manual (Page 67)

FoamLogix, Model 2.1A and 1.7AHP Class “A”
Electronic Foam Proportioning Systems 67
When the 1 FLOW LED lights, press and release
the  and  buttons at the same time.
The display shows 2 S 150 (or other preset default
value) and the FLOW LED lights. (See Figure
41: “Display - Simulated Flow Operation” on
page 64.)
Press the 3 ON button. The left-most LED on
the bar graph lights and the foam pump begins
running.
Foam concentrate flows out of the end of the
bypass hose.
To End Simulated Flow
First press the 1. ON button to STOP the foam
pump.
Press the 2. i button until the FLOW LED
lights.
Press and release the 3.  and  buttons
at the same time. The display shows the
current water flow value and the FLOW LED
lights.
De-energize the apparatus electrical system. 4.
Place the bypass valve to the INJECT 5.
position.
Secure bypass hose in the appropriate 6.
compartment.
Return apparatus to normal ready condition. 7.