SkyTrak 6042 Operation Manual - Manual (Page 135)

General Maintenance
133 Model 6042 Origin 5/02
C. Hydraulic Oil & Filter Change
(First 50 Hours)
(Filter Only)
(1000 Hour Intervals)
(Oil & Filter)
Change the hydraulic oil filter after the first 50 hours of operation and
change the hydraulic oil and filter every 1000 hours of operation thereafter.
Other than the 1000 hour interval, the hydraulic oil must be changed when a
hydraulic component has contaminated the system.
1. Level the vehicle, ground the carriage, place travel select lever in
(N) NEUTRAL, move the neutral lock lever to NEUTRAL LOCK
position, engage the parking brake switch.
2. Fully retract all cylinders and shut OFF the engine.
3. Remove the four capscrews (Figure 85, 1) holding the hydraulic oil
tank cover (2) to the tank (3), remove the cover.
Figure 85
50
1000
OT08402
OS08402
OH2670
OH2690
OH1920
2
1
1
3