SkyTrak 6042 Operation Manual - Manual (Page 25)

Operation
23 Model 6042 Origin 5/02
Operation
Accelerator Pedal
(Figure 5)
Pressing down the accelerator pedal (Figure 5, 1) increases engine and
hydraulic speed of the vehicle. The pedal is spring-loaded to return to idle
speed.
Service Brake Pedal
(Figure 5)
Pressing down the brake pedal (Figure 5, 2) decreases the speed of the
vehicle by applying the service brakes located in the axles. In the event of
engine power loss, the service brake pedal can also be used for braking. It
also activates and locks the rear axle to frame lock system when boom
angles are greater than 40° , as long as it is depressed.
Steering Wheel
(Figure 5)
Turning the steering wheel (Figure 5, 3) to the left or right steers the vehicle
in the corresponding direction. Any one of the steering modes are
selectable. Refer to “Steering Select Switch” on page 25.
Horn Button
(Figure 5)
Pressing the horn button (Figure 5, 4) in the center of the steering wheel
sounds the horn.
Figure 5
Operator Controls
OH1760
1
3
2
4