axle oil, A. axle oil level check, 250 hour intervals) – SkyTrak 6042 Operation Manual User Manual

Page 140: Approved universal tractor fluids, John deere, Ford / new holland, Massey ferguson, Chevron, Jdm j20c (hy-gard), Esn-m2c134-d (hydraulic oil134)

Advertising
background image

138

Model 6042

Origin 5/02

General Maintenance

A. Axle Oil Level Check

(250 Hour Intervals)

1. Level the vehicle, ground the carriage, place the travel select lever

in (N) NEUTRAL, move neutral lock lever to NEUTRAL LOCK posi-
tion, engage the parking brake switch and shut off the engine.

2. Clean the area around the axle fill plug (Figure 90, 1) and the axle

level plugs (2) on the opposite side of the axle and remove the
plugs from the axle housing.

3. Add Universal Tractor Fluid to bring the oil level up and even with

the plug holes. See chart of approved fluids above.

4. Re-install the axle fill plug (Figure 90, 1) and axle level plugs (2).

Figure 90

9. Axle Oil

APPROVED UNIVERSAL TRACTOR FLUIDS

JOHN DEERE

FORD / NEW HOLLAND

MASSEY FERGUSON

CHEVRON

JDM J20C (HY-GARD)

ESN-M2C134-D (HYDRAULIC OIL134)

M-1141 (PERMATRAN III)

CHEVRON 1000 THF

250

OH2710

OT0460

OA1320

1

2

FRONT AXLE SHOWN - REAR

AXLE SIMILIAR

3

Advertising