Accident prevention tags, Figure 1, New or additional operators – SkyTrak 6042 Operation Manual User Manual

Page 7: Safety practices

Advertising
background image

Safety Practices

5

Model 6042

Origin 5/02

Before beginning any maintenance or service, place an Accident Prevention
Tag (Figure 1, 1) on both the starter key switch and the steering wheel
(Figure 1), stating that the vehicle should not be operated. Actual Accident
Prevention Tags, which can be punched out and used, are included as the
last page of this manual. Retain these Accident Prevention Tags for reuse at
a later date.

Figure 1

At the time of original purchase, the purchaser of this vehicle was instructed
by the seller on its proper use. If this vehicle is to be used by an employee or
is loaned or rented to someone other than the purchaser, make certain that
the new operator is trained and authorized, in accordance with the OSHA
regulations referenced on page 3, and reads and understands this
Operators Manual before operating the vehicle.

In addition, make sure that the new operator has completed a walk-around
inspection of the vehicle, is familiar with all decals on the vehicle, and has
demonstrated the correct use of all controls.

Accident Prevention Tags

New or Additional Operators

DANGER

DANGER

OH1720

1

Advertising