SkyTrak 6042 Operation Manual - Manual (Page 67)

Operation
65 Model 6042 Origin 5/02
Starting Travel
1. Enter the operator cab, fasten the seat belt, start the engine, apply
the service brake pedal and disengage the parking brake switch.
Place the Neutral Lock Lever in the (D) DRIVE position.
2. Rotate the twist grip (Figure 42, 1) of the range select lever to 1st
gear.
3. Move the travel select lever (Figure 43, 1) to (F) FORWARD to
travel in a forward direction or to (R) REVERSE to travel backward.
4. Slowly remove your foot from the service brake pedal and press the
accelerator pedal to start travel.
IMPORTANT! Check for warning lights frequently during operation. Any
abnormal indication should be corrected as soon as practical.
Figure 42
Figure 43
OH1802
1
OH1792
1