Line move - endpoint, 1 explaining basic cy cles – ACU-RITE CNC 3500i User Manual
Page 152
126
7 Programming: Canned Cycles, sub-programs
7.
1 Explaining Basic Cy
cles
Line Move - EndPoint:
Specify the desired end point coordinate using actual position
designations, either in absolute or incremental.
All parameters are optional.
Field
Code
Description
X
X
Absolute position of, or incremental
distance to, the desired X-Axis destination.
Y
Y
Absolute position of, or incremental
distance to, the desired Y-Axis destination.
Z
Z
Absolute position of, or incremental
distance to, the desired Z-Axis destination.
U
U
Absolute position of, or incremental
distance to, the desired U-Axis destination.
Feed
F
Feedrate at which to conduct the
machining movement.
CornerRad
A
Positive arc radius for corner rounding,
negative X/Y distance for chamfering.
ToolComp
T
Select the modal tool diameter
compensation to activate or select Off to
deactivate comp.