ACU-RITE CNC 3500i - Manual (Page 174)

148 7 Programming: Canned Cycles, sub-programs
7.
1 Explaining Basic Cy
cles
This program will drill four holes. A Fixture Offset is used to relocate X
Y zero. When the Repeat Cycle is encountered, it will drill four more
holes at the offset location.
Block Description
11 Y 0.0000
12 DrillOff
13 Offset Fixture# 1 X 3.0000 Y 0.0000
14 Offset Fixture# 1
15 Repeat 7 Thru 12
16 Rapid Z 0.5000
17 EndMain