ACU-RITE CNC 3500i - Manual (Page 158)

132 7 Programming: Canned Cycles, sub-programs
7.
1 Explaining Basic Cy
cles
Arc Move - Center and EndPoint:
 Specify the arc movement using the actual coordinates of the
desired end point and the coordinates of the arc center point.
Field Code Description
Direction E Specifies a clockwise (CW) or
counterclockwise (CCW) arc direction.
(Required)
Xcenter I Absolute position of, or incremental
distance to, the desired X-Axis arc center
point. (Required)
Ycenter J Absolute position of, or incremental
distance to, the desired Y-Axis arc center
point. (Required)
X X Absolute position of, or incremental
distance to, the desired X-Axis destination.
Y Y Absolute position of, or incremental
distance to, the desired Y-Axis destination.
Z Z Absolute position of, or incremental
distance to, the desired Z-Axis destination.
Feed F Feedrate at which to conduct the
machining movement.
CornerRad A Positive arc radius for corner rounding,
negative X/Y distance for chamfering.
Revs L Number of revolutions from start position
to end point.