ACU-RITE CNC 3500i - Manual (Page 293)

ACU-RITE 3500i 267
9.1 Running a pr
ogr
am
Starting a program
 With a program selected and in Program Run Mode, touch the Auto
button to put the 3500i in auto mode.
 Select the starting block in the program if necessary.
 Touch the START button to execute the program, placing the CNC in
motion.
Pause, or Stop a running program
 Press the STOP key to stop, or pause the program and machine
motion.
 Press the START key to resume the program, placing the CNC in
motion, or:
 Touch the Manual button to cancel a program that is stopped.
Clearing a Messages
 Go to System Maintenance, and select Messages to clear or review
messages that have been displayed.
 Touch the message bar on the screen to clear a Warning message.
This removes it from the screen, but a copy is saved in the Messages
screen until it is deleted.
 To delete error messages, go to System Maintenance, and select
Messages
. Highlight a message and touch the Delete button.
 All error messages can be deleted in one step by touching the
Delete All
button.
 One or more error messages may be generated from a program
error.
 Re-load the program after it has been corrected, and restart at the
appropriate block.
A program can be started at the beginning, or at a block
location within the program.
Only Error messages will stop a program. Warning
messages can be cleared, and the program will continue.