ACU-RITE CNC 3500i - Manual (Page 374)

348 10 CAM: Programming
1
0
.1 CAM Pr
ogr
a
mming
 Verify Block Form graphic, and touch Yes to accept.
 Select the Pocket Cycle button from the Vertical
button bar to open the Pocket Cycle Form dialogue.
 Step Over: Enter 0.090.
 Start Height: Enter 0.100.
 Z Depth: Enter -0.75.
 Retract Height: Enter 0.100.
 Fin Stock: Enter -0.125.
 Touch Use button.
 The prompt bar will ask to select shape to use for this tool path.
Select the shape.
 Verify Tool Path graphic, and touch Yes to accept.