ACU-RITE CNC 3500i - Manual (Page 29)

ACU-RITE 3500i 3
1
.1 The 350
0i Powering Up the CNC Machine
Turn on the CNC machine according to the builder's instructions. Turn
the power switch on to the 3500i console.
The 3500i completely resets, activating the startup screen.
 With the EMERGENCY STOP button out, reset the
servo drive by pressing the SERVO RESET key.
 Press the Home button.
 Press the Start button. The 3500i default display is
the Manual screen.
When you power-on the CNC, ensure that the E-STOP
switch is in the in position.