ACU-RITE CNC 3500i - Manual (Page 32)

6 1 Introduction
1
.2 V
isual Displa
y Unit
1.2 Visual Display Unit
Operating Panel with Touch Screen display
The ACU-RITE 3500i has a 12.1-inch Flat-Panel Color Touch Screen
Display. The following list of items are also located on the front panel.
See "Manual Data Input" on page 20 for mapping information of the
start up screen. For information regarding the Key pad, see "Console
Key Pad" on page 19.
The following features are located on the front panel of the ACU-RITE
3500i console:
Screen Navigation
The 3500i screens change as different modes are activated. Basic
procedures and features of the software remain the same, regardless
of the 3500i mode.
 The 3500i console provides a touch screen operating panel. To
enter data, select a feature, or perform an action, momentarily touch
the corresponding button on the screen.
1 Touch screen Flat Panel Color Display.
2 Numeric key pad, and Axis selection keys.
3 Arrow keys
4 Axis Jog keys
5 Start, Stop, and Servo Reset keys
6 Emergency “E” Stop
7 Feed Rate override
8 Spindle Speed override
9 USB Port