ACU-RITE CNC 3500i - Manual (Page 375)

ACU-RITE 3500i 349
1
0
.1 CAM Pr
ogr
a
mming
 Select the Job Setup button from the Vertical button
bar to open the Job Setup dialogue.
 Enter “2” for the Tool Number.
 Enter .375 for the Tool Diameter.
 Enter -1 for the Tool Length.
 Enter Define and Use Tool for the Tool Action.
 Touch Use to accept the Job Setup.
 Select the Pocket Finish Cycle button from the
Vertical button bar to open the Pocket Finish Cycle
Form dialogue.
 Tool: Enter 2.
 Select Bottom Finish check box.
 Touch Use button.
 Verify Tool Path graphic, and touch Yes to accept.