ACU-RITE CNC 3500i - Manual (Page 207)

ACU-RITE 3500i 181
7.
2
C
a
n
n
e
d
C
y
c
le
s
 G-code format: G177
Field Code Description
Plunge
Feed J The feedrate at which the tool will "plunge"
into the pocket in the Z-axis. Default is last
programmed feedrate.
FinFeed K Feedrate used during finish passes. Default
is last programmed feedrate.
Rough
Feed I Feedrate used during roughing passes.
Default is last programmed feedrate.
RetractHgt P Z-axis absolute start and finish height (must
be equal to or above "H"), used as a safety/
clearance Z position before making X/Y
moves. Executed in rapid at start and end of
cycle. Defaults to current Z position at
beginning of cycle.
Coarse
Tool T Number of tool used for previous roughing
cycle.
SkipRough E Yes = Roughing pass is skipped, only finish
pass is performed.
No = Roughing pass is performed. (Default)
SkipFinish F Yes = Finish pass is skipped, only rough
pass is performed.
No = Finish pass is performed. (Default)
Direction Q Select Cw or Ccw.