10 .1 cam pr ogr a mming – ACU-RITE CNC 3500i User Manual
Page 344
Advertising
318
10 CAM: Programming
1
0
.1 CAM Pr
ogr
a
mming
In many cases when creating geometry there is more than one
solution. When multiple solutions are available, all geometry
solutions appear.
The Prompt Menu bar will ask that only the lines to be kept should
now be selected: Select the top, and bottom tangent lines.
The lines that will be kept will appear as dashed yellow lines.
Touch on an empty area in the graphics area to accept the
selection(s).
The geometry will now appear as two circles with two outside
tangent lines between them.
Advertising