ACU-RITE CNC 3500i - Manual (Page 186)

160 7 Programming: Canned Cycles, sub-programs
7.
2 Canned Cy
cles
EndMill Cycle
 The mill cycle is terminated with the EndMill block; at which point,
it rapids up to the StartHgt and rapids to the X and Y location
specified. If X and Y are not specified the tool remains in the current
position.
 G-code format: G176
Field Code Description
X X X ending point. Default: Current position.
Y Y Y ending point. Default: Current position.
Type Q Specifies the type of exit move;
1=Line Tangent, 2=Line Perpendicular,
3=Arc Tangent, 4=Line Arc Tangent.
Length M Length of exit move.
Radius R Radius of exit arc.
Angle C Angle of exit arc.