ACU-RITE CNC 3500i - Manual (Page 84)

58 3 Manual Data Input
3.1 Manual D
a
ta Input (MDI)
Once in Teach mode, the operator can use the control jog keys to
move the machine to the desired locations and then use the menu bar
buttons to create the commands to be saved.
Button Function
Rapid creates a rapid move using the current
position.
Line creates a line move using the current position.
Modal creates a modal using the last programmed
move command and the current position.
Delete Block will delete the highlighted block.
Quit will quit Teach mode without saving.
Exit will exit Teach mode, saving the part program.