ACU-RITE CNC 3500i - Manual (Page 373)

ACU-RITE 3500i 347
1
0
.1 CAM Pr
ogr
a
mming
 Select the Job Setup button from the Vertical button
bar to open the Job Setup dialogue.
 For the Program Units select “Inch”.
 Enter “1” for the Tool Number.
 Enter .375 for the Tool Diameter.
 Enter -1 for the Tool Length.
 Enter Define and Use Tool for the Tool Action.
 Touch Use to accept the Job Setup tool path.
 Select the Block Form button from the Vertical button
bar to open the Block Form dialogue.
 Xmax: Enter 6.000.
 Ymax: Enter 1.000.
 Zmax: Enter 0.000.
 Xmin: Enter -2.000.
 Ymin: Enter -7.000.
 Zmin: Enter -1.000.
Or
 Select the Estimate BlockForm button to have CAM estimate the
Block Form dimensions from the defined shape(s).
 Touch Use to accept the Block Form.