Appendix a sonartractm gvf-100 specifications, Appendix a sonartrac, Gvf-100 specifications a1 physical specifications – CiDRA GVF-100 Gas Volume Fraction Monitoring System User Manual
Page 104
Copyright © 2006 CiDRA Corporation
Page A-1
20639-01 Rev 03
Appendix A SONARtrac
TM
GVF-100 SPECIFICATIONS
A1 Physical
Specifications
A1.1 Power
Supply
AC Voltage Version: 100 to 240 Volts AC, 50/60 Hz, 25 watts
DC Voltage Version: 18-36 Volts DC, 25 watts
A1.2 Fuse
Protection
AC Voltage Version: The transmitter input power is fuse protected by
two 1 amp, 250 volt, 5mm x 20mm fuses.
DC Voltage Version: The transmitter input power is fuse protected by
two 3.15 amp, 250 volt, 5mm x 20mm fuses.
A1.3
Operating Temperature Range
Transmitter
-4°F to +140°F (-20°C to +60°C)
Sensor Head Process Temperature
-40°F to +212°F (-40°C to +100°C)
Sensor Head Ambient Temperature
-40°F to +140°F (-40°C to +60°C)
A1.4 Storage
Temperature
Range
Transmitter
-22°F to +176°F (-30°C to +80°C)
Sensor Head
-40°F to +185°F (-40°C to +85°C)
A1.5 Construction
Materials
•
Sensor Head
Fiberglass enclosure with PTFE gasket material for sizes 2 to 16 inch
Stainless steel enclosure with silicone end seals for sizes 18 inch and
above
•
Transmitter
Fiberglass enclosure with NEMA 4X rating.
Urethane gasket material.
Acrylic viewing window.