Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) - Manual (Page 15)

21-0421E rev1.1 VeDVR User Guide 7
Check Box
Provides 2 options: “9” means enable and “x” means disable. Use the “ENTER” or “EDIT” keys on the DVR or remote
control or a mouse to left click on them and switch between them.
List Box
List boxes provide more than 2 options. However, only one of them can be selected. Press the Edit key, use the “▲”
and “▼” arrow keys on the DVR or remote control or a mouse to select the option and press the Enter key. Example:
to the right of “Select Camera”, there is a list box to select one of the cameras and choose functions for it in the same
menu.
Edit Box
Input characters. Press “EDIT” to enter into edit mode and input characters by using the number keypad on the DVR
or remote control or left click a mouse to select from an on screen keypad. The number keypad buttons represent
different characters depending on the input mode:
• Press ”F3” on the DVR controls or left clicked mouse menu or “A” on the remote control to select number, upper
case, lower case or symbols.
• Use “◄” and “►” to move the cursor.
• Use “EDIT” to delete the character in front of the cursor.
• Press “ENTER” or “ESC” to exit edit mode.
Button Text
Do a special function or enter into the next sub-menu. Example: press the Procedure button to enter into the
Procedure sub-menu. Press “Confirm” to save the selections made and return to the parent menu. Press “Cancel” to
cancel any changes and return to the parent menu. A grayed out button can only be operated after it is enabled.
How to exit menu mode
Press ”ESC” until you are returned to the Preview Mode screen.
System Setup
Logging In
The first time you log into the DVR menu system, you must log in as an Administrator. The default user name is
‘admin’ and the default password is ‘12345’.
WARNING: It is extremely important that default Usernames and
default Passwords are changed at the time of installation as a security precaution.
1. Press the Menu button to produce the login box on the screen.
2. Select a user (default: admin).
3. Move the cursor to the Pass: field.
4. Enter your password. (default: 12345)
5. Press Enter to accept the password and advance the cursor to the “Confirm” button.