Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) - Manual (Page 51)

21-0421E rev1.1 VeDVR User Guide 43
PTZ Sequence
NOTE: Ensure the PTZ camera supports the sequence function before beginning.
“Sequence” is composed of several cruise points. Each cruise point includes one preset number, dwell time and dwell
speed. 16 sequences can be created.
1. Highlight the Setup button on the right side of the “Sequence No:” selection.
2. Press “ENTER” on the DVR controls, remote control or left click a mouse to display the Sequence configuration
menu.
3. Input the sequence number (1-16) in the Sequence No. box.
4. Use the arrow direction keys on the DVR controls or remote control or mouse pointer to navigate around the
screen to the various selections.
5. When at a desired selection, press “EDIT” or left click on the selection for a mouse menu to enter the following:
Cruise Point: Each Sequence is comprised of a Cruise Point number. Enter a Cruise Point number.
Preset: Enter a Preset number from the previous Preset section.
Dwell Time: Dwell time is the time remaining at that preset number. Enter the Dwell Time.
Dwell Speed: Dwell speed is the speed that the PTZ is moved to that preset number. Enter a Dwell Speed.
6. When these selections have been made, press the “Add” button to the right of them to add one cruise point.
7. Press the Confirm button to save the cruise point into the sequence.
8. After programming the sequence, press the StartSeq button to start and check the current sequence.
9. Press the StopSeq button to stop checking the sequence.
Del(ete) Cruise Point
• In the Sequence menu, enter a Cruise Point number in the “Cruise Point:” box and press the “Delete” button.
• After deleting, press Return.