Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) - Manual (Page 25)

21-0421E rev1.1 VeDVR User Guide 17
• Trigger Alarm Output.
• Send Email
• Notify RSE
2. Use “▲”, “▼” and “EDIT” on the DVR controls, remote control or left click a mouse to enable or disable each option.
“x” is disable and “9” is enable.
3. Press the Confirm button to save the selections and return to the Image menu. Pressing cancel will not save the
changes and will return to the Image menu.
Signal Loss
If there is a problem with the video camera or cable, the video image is lost. If the video loss alarm is enabled, the
DVR will generate an alarm.
1. Highlight the list box on the right side of the Video Loss selection and press “EDIT” on the DVR controls, the
remote control or left click with a mouse.
2. Use “▲”, “▼” to select the response option: Ignore or Active and highlight the Procedure button on the right.
3. Press “ENTER” to open the Video Signal Loss Response selection screen:
Alarm in Schedule
Setup a schedule to determine when the Video Signal Loss Alarm will be activated.
Ensure that adequate time periods are set to avoid missing possible occurrences.
When a Video Loss Alarm occurs within the defined schedule, the DVR will respond with one or more of the
selectable Control Methods. A maximum of 4 periods can be setup for each day of the week. The schedule of one day
can be copied to another.
NOTE: Time periods in one day cannot be repeated.
1. When a Video Loss Alarm has occurred during the defined schedule, the DVR will respond based on the procedure
selections. One or more selections include:
• On Screen Warning
• Audible Warning
• Upload to Center (send exception information to central host PC)
• Turn on Alarm Output.
• Send Email
• Notify RSE
2. Use “▲”, “▼” and “EDIT” on the DVR controls, remote control or left click a mouse to enable or disable each
option. “x” is disable and “9” is enable.
3. Press the Confirm button to save the selections and return to the Image menu. Pressing cancel will not save the
changes and will return to the Image menu.