Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) User Manual
Page 42
34
VeDVR User Guide
21-0421E rev1.1
RSE
(Remote Service Environment)
To make selections in the RSE screen:
1. Use the “◄”, “►”, “▲” and “▼” arrow buttons on the DVR controls or remote control or mouse pointer to high light
the screen selections.
2. Press “EDIT” to change a selection
3. Use “▲”, “▼” to change the selection. Left click the mouse to change the selection.
4. Press “ENTER” to save a selection and return to the Image Menu.
5. After making changes, press Confirm to save the changes or Cancel to not save the changes.
•
Enable RSE by changing the “×” to a check mark “9”.
•
Enter the RSE Server IP/Port
•
Enter the proxy IP/Port
•
Enter the Poll Rate
•
Select the Comm(unication) Sequence:
−
IP Only.
−
PSTN Only. Enter the RSE User(name), Pass(word), Phone Number.
Press Confirm to save changes or Cancel not to save changes and return to the previous menu.