Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) - Manual (Page 35)

21-0421E rev1.1 VeDVR User Guide 27
11. Page Number: The file list box will display a maximum of 8 files. If the matching files are more than 8, select a
page number to list additional files. 500 pages holding 4000 files can be searched for at one time. Enter a page
number using the numeric keys or the up/down arrow “▲”, “▼” keys.
12. File List Box: Will display the matching files. The file number, its start time and length (size).
13. Save Device: The Backup sources that can be selected to save the files or clips are: USB Disc, USB HD, USB
CD/DVDRW, SATA CDRW/DVDRW SATA HD (External HDD on the ESATA rear connector).
14. Backup: Begin copying the files.
15. Backup Today: Backup all files that occurred during the present day.
Refer to the list of compatible back up media in the DVD Writer disks information in the Utilities/Hard Disk
Management menu section of this manual.
Play Back Selections
1. Search and Playback File: In the play back screen, select the main channel, second channel (2 channel
playback), record type, time section. High light the “Search” button and press the “ENTER” key. The DVR will
search and list the matched files. To begin playback on a file, after the search is complete, use the direction
arrows to navigate to the list and then use up and down to select the file. Press the Enter button to start playback.
Pressing the “Play” On-Screen Display button will begin playback from the first file in the list, like the behavior
described in the next section. NOTE: If using the mouse, double clicking on a file will select it and start playback.
A single-click will turn on the Select checkmark.
2. Sel: The Select checkmark is used to mark files for export.
3. Playback by Time: In the play back screen, select the main channel, second channel (2-ch playback), file type
and date and time selection. Highlight the “Play” button with the arrow buttons and press “ENTER” or click on it
with the mouse pointer. The DVR will begin playback based on the date and time selection.
4. Search by Card No and Playback file: In the play back screen, select the main channel, second channel (2-ch
playback), file type, change the card No. search option from an “×” to a check mark “9” and enter the card
number. Highlight the “Search” button with the arrow buttons and press “ENTER” or click on Search with the
mouse pointer. The DVR will search and list the matching files.