Usb mouse control, Start up – Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) User Manual

Page 12

Advertising
background image

4

VeDVR User Guide

21-0421E rev1.1

USB Mouse Control

Plug a USB mouse into the USB connection on the DVR’s rear panel. A mouse will duplicate any of the front panel
control selections described in this guide. The front panel control described to operate the screen selection can be
operated by the mouse by clicking on the selection with the mouse pointer.
Left click to select or edit.
Right click to cancel or exit (or display menu in live view)
A mouse wheel can be used to change cursor location in the edit field or cycle through e.g. days, months, years.
Right click the mouse in the “Camera Views” screen for the Main Menu:

Single Camera View

Multiple Camera Preview

Next Preview

PTZ Control

Play

Event Play

Manual Record

Close Status

Switch Vout (Spot button)

Clicking on the password log-in box will display a keyboard selection box. Selections can be made with the mouse
pointer to enter characters in the password box etc.

0 1

2abc

3def

4ghi

EDIT

5jkl 6mno

7pqrs 8tuv 9wxyz F3

Start Up

With a monitor connected to the DVR, plug in the DVR to an AC mains supply and switch on the power switch
beside the electrical power plug on the DVR’s back panel.

The DVR will enter into Preview Mode after it starts up.

When the Preview Mode screen first opens, a bar with pictures of hard drives will display at the top of the screen.
The hard drive that is enabled will appear with a check mark. In this case, hard drive number 3 is present.



Advertising