Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) - Manual (Page 50)

42 VeDVR User Guide 21-0421E rev1.1
5. In the PTZ control screen, use the direction keys on the DVR control or remote control to adjust the PTZ position.
Use the “IRIS+”, “IRIS–“, “FOCUS+”, “FOCUS–“, “ZOOM+”, “ZOOM–“ buttons to adjust the iris, focus and zoom.
6. When completed, press “ENTER” to return to the “Set Preset” screen.
7. For mouse control, there is a control panel in the upper right corner of the PTZ control screen. The top 2 symbols
represent the IRIS+ on the left, IRIS– on the right adjustment controls. The next 2 symbols down are for the
FOCUS+ on the left, FOCUS– on the right adjustment controls. The next 2 down are the ZOOM+ on the left,
ZOOM– on the right adjustment controls. Rest the mouse pointer on any of these symbols and press and hold the
left mouse button to make adjustments: increase: +, decrease: –. Below these symbols is the direction control.
Rest the mouse pointer and left click and hold on any of these directions to maneuver the PTZ camera.
8. When completed, right click the mouse to return to the Set Preset screen.
9. Press the Save button to save the preset number and its adjustments.
10. Repeat this procedure to configure other preset numbers.
11. After all preset numbers are configured and Saved, press the Return button to return to the PTZ menu.
Delete a PTZ Preset
• In the Preset menu, enter a preset number in the “Preset:” box and press the “Delete” button.
• After deleting, press Return.