Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) - Manual (Page 20)

12 VeDVR User Guide 21-0421E rev1.1
Display Menu
The Display Menu enables global system selections affecting the video output, menu display and date and time.
Language
Select: English, French, Spanish.
Unit Name
Assign the DVR a unique name. The default unit name is “DVR”.
1. Highlight the Unit Name edit box.
2. Press “EDIT” on the DVR controls or the remote control or the left clicked mouse menu.
Press “F3” on the DVR controls or left clicked mouse menu or “A” on the remote control to
select the desired keypad functions (Uppercase, Lowercase, Numbers or Symbols).
3. Use the DVR or remote control keypad or mouse menu to enter the Unit Name.
4. Press “ENTER” on the DVR controls, remote control or mouse menu when finished.
Device ID
The Device ID is used to identify the DVR to the IR Remote Control. Set this number from 01 to 255. Set the Device
ID of the IR Remote Control to the same number. If there are multiple DVR’s in a room, the remote control will control
all units with the same Device ID. The default is “88”
1. Highlight the Device ID field and press the Edit key.
2. Use
“▲”, “▼” to change the Device ID.
3. Press “ENTER”.
Enable Password
A password is required by default to access the Main Menu. A “9” indicates a password is required and a “x” indicates
that no password is required.
Highlight the “Require Password” field and press “ENTER” or “EDIT”.
Screen Saver
Set this selection to determine the timeout which controls how long the system menus are displayed after the last user
activity on the front panel/on-screen display/mouse. Available options are NEVER, 1 Min, 2 Min, 5 Min, 10 Min, 20 Min,
or 30 Min.
1. Highlight the Screen Saver field.
2. Use
“▲”, “▼” to cycle through the available options.