Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) - Manual (Page 52)

44 VeDVR User Guide 21-0421E rev1.1
PTZ Cruise
NOTE: Ensure the PTZ camera supports the cruise function before beginning.
“Cruise” refers to remembering the track of the PTZ movement.
1. Highlight the Setup button on the right side of the “Cruise” selection.
2. Press “ENTER” on the DVR controls, remote control or left click a mouse to display the Cruise configuration
menu.
In the PTZ menu, press the Setup button on the right side of the Cruise item.
3. Press the RecCruise button.
4. This will access the PTZ control interface. Start controlling the PTZ with the direction keys. Press “ENTER” to
save the operation track and return to the Cruise setup menu.
5. Press the StartCruise button to repeat the PTZ track until pressing the StopSeq button to stop it.
6. Press the Return button to return to the PTZ menu.
Press Confirm to save changes or Cancel not to save changes and return to the Main Menu.
Copy to:
• In the PTZ programming screen, the configurations for one PTZ camera can be copied to another.
• In the “Select Camera:” box at the top of the screen, enter a PTZ camera number whose configurations are
needed for another PTZ camera connected to the DVR.
• In the “Copy to Camera” box at the bottom of the screen, enter the camera number to copy the selections to and
press Copy.
For PTZ DVR front panel controls, refer to the Front Panel Indicators and Controls section.
For PTZ mouse control, right click the mouse in the camera preview screen and select “PTZ Control” from the on
screen menu. This PTZ control screen is the same as the one displayed when the “Adjust” selection is used in the Set
Preset screen of the PTZ menu.