Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) - Manual (Page 44)

36 VeDVR User Guide 21-0421E rev1.1
Record Camera
Select the channels to record for each alarm input.
Use the “ENTER” or “EDIT” key on the DVR controls or remote control or left click with a mouse to enable record
channel. “x” means disable and “9” means enable.
NOTE: Recording must be enabled in the Recording Menu and the Recording Type must be set to: MotionIAlarm or
Motion & Alarm in the Recording Menu, “Recording Channel Configuration”, “Enable Record”, “Schedule” for the
cameras to start recording when an alarm occurs.
Alarm in Schedule
Setup a schedule to determine when the Motion Alarm will be activated.
Ensure that adequate time periods are set to avoid missing possible occurrences.
When a Motion Alarm occurs within the defined schedule, the DVR will respond with one or more of the selectable
Control Methods. A maximum of 4 periods can be setup for each day of the week. The schedule of one day can be
copied to another.
NOTE: Time periods in one day cannot be repeated.
1. When a Motion Alarm has occurred during the defined schedule, the DVR will respond based on the procedure
selections. One or more selections include:
• On Screen Warning
• Audible Warning
• Upload to Main PC (send exception information to the central host PC)
• Turn on Alarm Output.
• Send Email
• Notify RSE
2. Use “▲”, “▼” and “EDIT” on the DVR controls, remote control or left click a mouse to enable or disable each
option. “x” is disable and “9” is enable.
NOTE: If On Screen Warning is enabled, when a motion alarm occurs and the DVR is in preview mode, the DVR will
show the related camera. If more than one camera is activated, the DVR will display them one after the other every 10
seconds. When the motion alarm is cleared, the DVR will return to the normal Preview Mode screen.
3. Press the Confirm button to save the selections and return to the Image menu. Pressing cancel will not save the
changes and will return to the Image menu.