Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) User Manual
Page 28
20
VeDVR User Guide
21-0421E rev1.1
Motion Alarm Control
1. Highlight the Procedure button to the right of the Mot(ion) Det(ection) Area button in the “Camera Input
Adjustment” sceen.
2. Press “ENTER” to display the Motion Alarm Control menu.
Motion Alarm Record Channel Setup
When a motion alarm has occurred, the related camera(s) can be turned on to start recording. In the Motion Alarm
Control menu, select one or more camera record channels.
•
Use “ENTER” or “EDIT” to enable the channel. The “x” changes to “9” to enable the function.
NOTE: Recording must be enabled and the Recording Type must be set to Motion Detection, Motion & Alarm or
Motion or Alarm in order for the cameras to start recording when motion is detected.
Alarm in Schedule
Setup a schedule to determine when the Motion Alarm will be activated.
Ensure that adequate time periods are set to avoid missing possible occurrences.
When a Motion Alarm occurs within the defined schedule, the DVR will respond with one or more of the selectable
Control Methods. A maximum of 4 periods can be setup for each day of the week. The schedule of one day can be
copied to another.